Smoktech Vmax Variable Voltage Electronic Cigarette ( VV Mod )
This is an elegant and stylish variable voltage mod , which combines the performance with an accessible price . It has long autonomy batteries and it can be totally customized on your taste .
You can very easily visually adjust the voltage , in steps of 0.1 V from 3V to 6V .
Short description of Vmax Variable voltage mod:
-
Variable voltage from 3V to 6V with 0.1 V
-
LED display , which allows you to change the voltage , to check the atomizer's ohms resistance and check the battery .
-
It is compatible with all clearomizers/cartomizer/atomizers with 510/eGo thread .
-
To use with 18350 batteries and trustfire charger .
-
Available color : Stainless steel
The Kit includes the following :
-
1 X Vmax V4 body
-
2 X 18350 batteries ( 900 mah each )
-
1 X Charger
You will also need a clearomizer/atomizer to can use this product . You can find them here on our website .
Technical specifications Vmax variable voltage mod :
-
Manufacturer : Smoktech
-
Length : 110 mm
-
Diameter : 21 mm
-
Amperage : 5 A
-
Variable voltage : 3V-6V
-
Discharge voltage: 6v - 8.4v
-
Quiescent current: Step-down regulator
-
Material : Stainless steel
More details of Vmax Variable Voltage Electronic cigarette ( VV mod )
User settings :
-
UU- Increase voltage
-
UD- Decrease voltage
-
SO- Power on/off
-
UC- Battery Check
-
DS - display information setting
-
*do- atomizer output voltage
-
*du- battery output voltage
-
*dR - atomizer ohm
-
LO- LED on/off
Increasing voltage :
1. Press the button 3 times in a row until "UU" is shown on the display.
2. When UU is shown on the display, leave the button idle for 2 seconds. The display will change to show the last voltage selected.
3. Once the voltage is displayed, each time you press the button the voltage will be increased with 0.1V. When you reach 6.0V, it will rotate back to 3.0 and go up again.
4. When you have reached the desired voltage level , leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.
Decreasing the voltage :
1. Press the button 4 times in a row until "UD" is shown on the display .
2. When UD is shown on the display , leave the button idle for 2 seconds. The display will change to show the last voltage selected.
3. Once the voltage is displayed, each time you press the button the voltage will be decreased with 0.1V . When you reach 3.0V, it will rotate back to 6.0 and go up again.
4. when you have reached the desired setting, leave the button idle for 2 second. The setting will be saved and VV will resume normal operation.
Power On/Off:
1. Press the button 5 times in a row until "SO" is shown on the display.
2. When UD is shown on the display, leave the button idle for 2 seconds. The display will show the last setting, on or off .
4. Each time you press the button the display will toggle between on/off.
4. When you have reached the desired setting, leave the button idle for 2 seconds. If you selected "OF" the VV will go into standby mode.
Battery Check:
1. Press the button 6 times in a row until UC is shown on the display.
2. When UC is shown on the display, leave the button idle for 2 seconds, the digital display will show your battery voltage measurement.
3. The battery voltage will be displayed for 2 seconds, then the display will turn off.
Display Information Setting During Vaping:
1. Press the button 7 times in a row until DS is shown on the display,
2. When DS is shown on the display, leave the button for 2 seconds, the display will show the current setting: DO, DU or DR.
3. Each time you press the button, the setting will toggle among "DO" "DU" or "DR" ,
4. When "DO" is chosen, leave the button idle for 2 seconds, the setting will be saved and the display will show your atomizer working output voltage during your vaping;
5. When "DU" is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your battery voltage during your vaping.
6. When "DR" is chosen, leave the button idle for 2 seconds, the setting will be saved and the display will show your atomizer resistance during your vaping.
LED On/Off
1. Press the button 8 times in a row until "LO" is shown on the display.
2. When LO is shown on the display, leave the button idle for 2 seconds, the display will show the current setting: ON/OFF .
3. Each time you press the button, the setting will toggle between on/off.
4. When you have reached the desired setting, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.
Short Circuit Protection:
The display will show the below error code when there is a short circuit:
1. F1: resistance for the heating coil of cartomizer is bigger than 0.5R, or smaller than 1.3R
2. F2: resistance for the heating coil of cartomizer is smaller than 0.5R
Welcome to our store!
.jpg "Metallic DCTank V2 Cartomizer 6 ml capacity")
