Lavatube kit 4.0 is an ultimate generation product , easy to use , both for beginers and experienced users .

The kit contains the following :

• Lavatube body 4.0 made of Chrome
• one High Voltage Atomizer
• Two Lavatube batteries 18650 with a capacity of 1700 mAh each .
• One TrustFire TR002 Charger
• Chromed Drip Tip
• Case
• Manul with instructions

The voltage can be adjusted between 3 V and 6 V with 0,1 V .

The adjustment can be made by pressing "+" and "-" buttons to increase or decrease the voltage with 0.1 V .To lock the voltage at a specific value you need to keep pressed both buttons 5 seconds . To unlock the voltage you need to do the same .

To check the atomizer's resistance press Shortly and simultaneously the Power button and one of the buttons "+" or "-" for 5 times and the display will show the value of atomizer`s resistance  mounted on Lavatube 4.0.

Features

• Compatible with almost all atomizers and cartomizers.
• It can take low resistance atomizer's from: 1.0-5.0ohms
• ego and 510 connection
• Length : 130 mm
• Diameter : 22 mm
• Brand : L-Rider
• Model : EpicStorm Lambo v4
• Certificates : CE,RoHS,UL,UN38.3
• Made from Chrome .
• The Lavatube Body has an LCD screen which shows the voltage and the remaining power of the battery .
  Has the ability to check the battery voltage
• Support and maximum 9amps out put current.

• Protected agains over-heating
• Protected against short-circuit
• Protected agains battery inversion
• Tension protection
• Hole for gas evacuation

We have 4 buttons on the exterior housing of the Electronic Cigarette

• -Power button (Red)
• -Fire button
• -2 buttones to adjust the voltage(+ and -)

Power button ( Red )

-It has 5 click protection function ,wich means you need to push 5 times the button in 2 seconds to turn on/off the battery.

Fire button 

-After you turn on the battery , by pressing this button you will turn on the atomizer at the voltage you had set.

+ and - Buttons

-Are used to adjust the voltage by 0,1 V. If yiu reach at 6 V and press "+" the voltage will be 3 V.

The LCD Screen is easy to use and it indicate the voltage you had set.

In addition the Lavatube corp has a "block" function , which blocks the voltage level to a certain value, eliminating the risk of changing the voltage from mistake.To lock or unlock the voltage voltage you must press the "+" and "-" simultaneously for 5 seconds.