MODEL L-RIDER TRANSFORMER

The Kit contains the following :

• -L-Rider Transformer body
• -2 batteries 18650 with a capacity of 1800 mAh
• -TrustFire TR001 charger
• -2 Clearomizers CE5 without wick
• -eGo Case
• -Intructions manul in english

Technical characteristics L-Rider Transformer body :

• Length : 136 mm (with 18650 battery ) or 107 mm ( with 18350 battery )
• Diameter : 22 mm
• Material : Chrome
• Model : Transformer
• Certificates : CE,RoHS,UL,UN38.3

Features :

• -You can check the atomizer's resitance and battery level 
• -Variable voltage from 3V to 6V , with adjustment of 0,1 V .
• -Air Valve :screw the air valve clock wise, less air will come into the atomizer when you enhale. Screw it anticlockwise and more air will run into the atomizer.
• -Telescope:Screw it anticlockwise to adjust a proper room for 18650, 18490 or 18350 protected/unprotected batteries.
• -eGo and 510 connection
• -Can use atomizers with resitance 1-5 Ohmi .

Because of the 510 connector that is equiped the L-Rider Transformer body can be used with :

• -Almost all cartomizers
• -Almost all atomizers

The L-Rider Transformer body has 5 click protection , to avoid any accidents . To turn on/off push the power button 5 times in 2 seconds .

It has an LCD and it displays :

• -Voltage
• -Battery level
• -Value of resistance 

To check the voltage press the Power (Red) Button for 5 times in 3 seconds and the LCD will display the battery voltage.

We have 4 buttons on the exterior housing of the Electronic Cigarette

• -Power button (Red)
• -Fire button
• -2 buttones to adjust the voltage(+ and -)

Power button ( Red )

-It has 5 click protection function ,wich means you need to push 5 times the button in 2 seconds to turn on/off the battery.

Fire button 

-After you turn on the battery , by pressing this button you will turn on the atomizer at the voltage you had set.

+ and - Buttons

-Are used to adjust the voltage by 0,1 V. If yiu reach at 6 V and press "+" the voltage will be 3 V.

The LCD Screen is easy to use and it indicate the voltage you had set.

In addition the Lavatube corp has a "block" function , which blocks the voltage level to a certain value, eliminating the risk of changing the voltage from mistake.To lock or unlock the voltage voltage you must press the "+" and "-" simultaneously for 5 seconds.