More over you can check the value of resistance , use low resistance atomizers (1.0-5.0 Ohmi) .
It has an LCD screen that displays the voltage,the resistance’s value and the battery power level .
If you want to check the resitance of atomizer press shortly and simultaneously the Power button and one of the buttons "+" or "-" for 5 times and the display will show the value of atomizer`s resistance mounted on Lavatube 4.0
Because of the 510 connector that is equiped the Lavatube Body 4.0 aka EpicStorm / Lambo this can be used with :
-
-Almost all cartomizers
-
-Almost all atomizers
We have 4 buttons on the exterior housing of the Electronic Cigarette
-
-Power button (Red)
-
-Fire button
-
-2 buttones to adjust the voltage(+ and -)
Power button ( Red )
-It has 5 click protection function ,wich means you need to push 5 times the button in 2 seconds to turn on/off the battery.
Fire button
-After you turn on the battery , by pressing this button you will turn on the atomizer at the voltage you had set.
+ and - Buttons
-Are used to adjust the voltage by 0,1 V. If yiu reach at 6 V and press "+" the voltage will be 3 V.
The LCD Screen is easy to use and it indicate the voltage you had set.
In addition the Lavatube corp has a "block" function , which blocks the voltage level to a certain value, eliminating the risk of changing the voltage from mistake.To lock or unlock the voltage voltage you must press the "+" and "-" simultaneously for 5 seconds.
Lavatube also has a voltage regulator output which will always send the same flow of current to atomizer whether the battery is fully charged or almost flat, so you can enjoy the same quantity of vapors always.
To protect from overheating , if you hold down the fire button pressed for 10 seconds without a break the power supply will automatically switch off,until you don't press anymore the power button
If you put the battery reverse the protection system will not let you to turn on. Lavatube will switch off also when the battery is almost empty.
Lavatube has a built-in voltmeter that allows you to view the battery voltage by pressing the red button 7 times. Thus for a few seconds you will see how much time you can use before you need to charge the battery.During the battery life the battery voltage will drop from 4.2 V to 3.3 V. The LCD will flash when the battery needs to be recharged and stop automatically when is no longer current, when it reaches to 3.3 V. We do not recomand to use the battery unitil it reaches to 3.3 V beacause the lifetime of the battery will be shorter.
In case of detecting any excess current higher than 2.5 A , the unit will shout down automatically,to avoid possible damages.
One more security measure is the ventilation hole situated at the bottom of the corp , to avoid the potential unpredictable behavior of lithium-ion batteries.