SLB eGo-V v4 MEGA battery 1300mah PassThrough variable voltage/wattage and ohm meter
Specifications Variable voltage battery from GreenVaper ( Sailebao ) :
This is the newest battery released on market from Greenvape . The main extra feature , is the ohm meter , which was missing on the previous models ( slb ego-v3 , slb ego-v2 and ego-v batteries ) .
The package contains the following :
Available colors :
Main Features :
Technical specifications :
How to use it :
On / Off mode
Clicking the power button 5 times steadily in 3 seconds will enable the battery . Meanwhile the power button will blink 5 times during this operation .
Atomizer and cartomizer compatibilty
The eGo-V V4 battery has a standard eGo/510 connection for maximum compatibility .
Ohm/Resistance Meter:Press and hold the "-" button about 2+ seconds and it will display the atomizer resistance.
Variable voltage ( vv ) and variable wattage ( vw ) mode
Press and hold the "+" button about 2+ seconds to toggle back and forth between voltage and wattage variable modes.
Voltage can be adjusted from 3.0V-6.0V in 0.1V increments by simply pressing de "+" and "-" buttons . Once you reach the higher or lower ends of the voltage range it simply cycles around either way ( for example : pushing down at 3.0 takes you to 6.0 , pushing up to 6.0 takes you to 3.0 )
Wattage can be adjusted from 3.0W-15.0W in 0.5W increments by simply pressing "+" and "-" buttons . Once you reach the higher or lower ends of the wattage range it simply cycles around either way ( for example : pushing down at 3.0 takes you to 15.0 , pushing up to 15.0 takes you to 3.0 )
Switch the mode
Holding "+" button simultaneously for 5 seconds , the ego-v v4 will switch VV to VW or VW to VV . There are "V" or "W" symbols on the right side of the digit display when you make the switch .
Lock the selected voltage or wattage
You can lock the setting by holding the "+" and "-" buttons simultaneously for 3 seconds after setting your voltage or wattage , so no accidental voltage/wattage changes are made .Repeating the process to activate the buttons symbol shows on the digit display when they are locked and disappear when unlocked .
14 seconds safety cutoff
If the button is held down for 14 seconds or longer the ego-v v4 will shut itself off and become locked , until the button is released and unlock by 5 clicks of the button . Protect you and the device from situations where it's in your bag or pocket and something were to accidentally activate the swithc without your knowing .
The digit display will enter sleeping mode and shut itself down if no operation on the "+" and "-" buttons for 20 seconds , even if you press the power button .
You are able to use the battery when it's charging .
How to charge
The eGo-V V4 needs to be recharged when the battery indicator flashes repidly and prodouces no mre vapor . Use the included cable , connect the battery and the power outlet/USB port of your computer , USB home charger or USB car charger . The battery indicator will cycle while charging . When battery indicator stop circulating and stays at full , the charging is complete .
Normal charging time should be around 3-4 hours for eGo-V V4 battery . We suggest that you charge in time when the battery power below 10% ( that means 1 bar in the battery symbols )
The eGo-V V4 can be charged and used 300 times approximately .
There are currently no product reviews.
141.74RONAdd to Cart
125.84RONAdd to Cart
24.20RONAdd to Cart
48.49RONAdd to Cart