Kanger Protank Kit with pyrex glass tank ( bottom coil glassomizer )
The Kanger Protank Kit includes the following :
-
1 X ProTank with pyrex glass tank
-
1 X ProTank Base
-
2 X ProTank Coils (2.5ohms)
-
1 X ProTank eGo Cone cover.
-
1 X Case with instruction slip
This new bottom feeding tank system features a Pyrex glass tank and replaceable atomizer coils.
Holds up to almost 3ml of your favorite e-Liquid. The ProTank has a nice easy draw and produces very good vapor and flavor.
510 threads allows it to fit most any mod device.
It has been tested with the Zmax, Vmax , Tesla, eVic and eGo series batteries. Because of the design of the air flow slots, it should work on most 510 threaded devices.
To fill the tank you simply invert it and unscrew the atomizer coil base and drip/inject the liquid into the outer portion of the tank. Screw the base back on and attach to your battery. To replace the atomizer coil, invert as above and remove the base. Simply unscrew the atomizer head and replace in reverse order.
Features:
-
Manufacturer : KangerTech
-
Replaceable Atomizer Heads ( can be used with eVod coils or vice versa )
-
Bottom Coil for better performance from your eliquid
-
Pyrex Glass Tank for protection from harsh liquids
-
Capacity is 2.5ml but it can hold up to 3ml if you fill it at less of an angle.
-
Comes with 2.4ohm Coils.
-
Unlike other Kanger Tanks, the ProTank is 510 Threaded and it will work on 510 thread MOD/APV without the need for an adapter
-
Matching Ego Cone Cover included
Tips:
The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomizer.
Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.
The atomizer head of the Protank can unfasten when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base of the Protank.
It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. We recommend cleaning the battery before charging it.
When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.
Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak. Replace the atomizer head with a new one if available.
You can find additional atomizer protank coils here :
shane owen
-
13/09/2013
well iv not long being a vaper, i have bought many tanks,most of them a good smoke,but they come with the hastle of bad taste etc,anyway I bought this tank and I have to say its brill no bad taste even at high volt,and the vapour from it is huge,only one down side, is that you wont put it down,brilliant
Rating:
Write Review