The iTaste MVP 2.0 is a 510/Ego threaded device with a built-in 2600mAh battery. This box mod is loaded with features such as VV, VW, passthrough function, LCD screen, ohm meter and can even be used as an on-the-go charger for your portable devices.
The new function of MVP2.0 is variable wattage (you can adjust output wattage from 6.0 - 11.0 W in 0.5 watt increments) . It also have other substantial improvements in both appearance and function.
The kit includes the following :
iTaste MVP V2.0
Innokin iClear 30 Dual Coil Clearomizer
Charging Cable
Avaialble colors :
Black
Stainless steel
Technical specifications :
Size:41*22*107mm
Battery Capacity:2600mAh
Operating Voltage:3.3-5.0 V
Charging Time:3.5H-5.5H
Colors:Black , Stainless steel
Release Date:2013-08-20
Main features :
Variable Voltage: voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments
Variable Wattage: Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments
Ohms meter : Reads resistance of your atomizer/cartomizer/clearomizer
Puff Counter
Short Circuit/Atomizer Protection:
Over-Discharge Protection
Battery Level Indicator
Large battery capacity
iTaste MVP e-cigarette built-in 2600 mAh polymer Li-Ion rechargeable battery
High compatibility 510 connector
Thread fits iClear10, iClear16, iClear30 etc
ON/OFF battery switch
10 seconds cutoff
Pass through
Remembers last set voltage or wattage when the battery is turned off and then back on
Built-in 3 digit display : Digital display shows Ohms meter, Voltage /Wattage setting, number of puffs taken since last time the battery was turned off
Portable power source for electronic products
More details :
Quickly clicking three times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.
10-Second Cutoff: If the button is held down for 10 seconds or longer, the iTaste VV will shut itself off until the button is released.
Passthrough: The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging.
Settings Retention: The device remembers the last voltage or wattage used when switching batteries.
Display Information: The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.
Innokin iClear 30 Dual Coil Clearomizer
The iClear 30 features dual coils, an easily replaceable atomizer head, a large 3ML capacity, and rotatable threaded mouth piece.
Replaceable Dual Coil Innokin iClear 30 is the first dual coil clearomizer with a replaceable atomizer head, making it very inexpensive to maintain, while providing huge amounts of vapor and flavor.
The huge capacity is another great feature of the iClear 30. It has a large 3ml ch...
Innokin iTaste SVD original telescopic mod with variable voltage/wattage
The iTaste SVD very well be Innokin's finest advanced personal vaporizer to date. This APV is packed to the brim with useful features. Not only that, but the SVD is a real powerhouse.
You could say that the Innokin SVD packs beauty, brawn and brains all in the same package!
Innokin's hot new device starts out with a telescoping body that features two swappable tube sizes. This allows ...
Innokin iTaste 134 Stainless steel original mod with Variable Wattage
The iTaste 134 is a microprocessor-controlled VW mod that allows you easily adjust the wattage with a rotational wheel . The solid stainless steel body gives it a fairly hefty weight. With 510/eGo threading, and a removable beauty ring, this mod is compatible with virtually any clearomizer, cartomizer or tank. It is a great device for all vapers !
The iTaste 134 uses a single 18650 battery (not included). The ...