Vamo Body - Detachable VV and VW Mod
Vamo Body - Detachable VV and VW Mod - Image 2
Vamo Body - Detachable VV and VW Mod - Image 3
Vamo Body - Detachable VV and VW Mod - Image 4
Vamo Body - Detachable VV and VW Mod - Image 5

Vamo Body – Detachable VV and VW Mod

208.37 lei

In stock

Vamo Body – Detachable VV and VW Mod

This Vamo body with variable voltage and variable watts it is a new well designed mod . It's special feature is that it is detachable and it can work with a 18350 battery ( having mounted just a mini segment ) or two 18350 batteries ( having mounted two mini segments ) . It can also work with a 18650 battery ( two mini segments ) .

The output voltage can be adjusted from 3V to 6V in steps of 0.1V and the working power from 3 Watts to 15 Watts in steps of 0.5 Watts .

It is compatible with all clearomizers , cartomizers and atomizers with ego or 510 thread because it has ego/510 thread . ( ce4 clearomizers , Vivi Nova , DCT510 , etc  .

The kit includes : 

  • 1 X Vamo Body ( without batteries )

You can find batteries and chargers HERE .

Technical specifications Vamo Body VV and VW Mod :

  • Weight of device: 135g
  • Outer Diameter: 22mm
  • Inner diameter:18.5mm
  • Length with Two 18350 batteries: 136mm
  • Length with One 18350 battery : 105mm
  • Batteries capacity : 900/1800 mAh
  • Compatible Batteries: 18350 / 18650
  • Variable Voltage: 3V-6V with 0.1V
  • Variable Wattage: 3W-15W with 1 W
  • Threading:510/eGo
  • Output current : 0-2.5A

Vamo Body has dual mode setting : 

  • VV Mode : You can adjust voltage  from 3.0 to 6.0 Volts in 0.1 volt increments. 
  • VW Mode : You can adjust Wattage from 3.0 to 15 Watts in 0.5 Watt increments.

To switch between the two mods you need to hold down the two mini buttons for 3 seconds .

User settings :
 
Turn On or Off:
Click the big Power button 5 times within 2 seconds (on/off) to turn on / off the device .
 
Switch between VV and VW:
To switch power mode from volts to watts. press and hold (+) and (-) at the same time for 3 seconds. (v for volts, w for Watts).
 
Voltage adjust:
Tap the (+) or (-) buttons to raise or lower output voltage (in 0.1 volt increments).
 
Wattage adjust:
Tap the (+) or (-) buttons to raise or lower output wattage (in 0.5 watt increments).
 
Resistance check:
Press and hold the (+) button for 3 seconds (resistance is displayed in ohms) and the you will see on the LCD display the resistance of atomizer . 
 
Battery voltage check:
Press and hold the (-) button for 3 seconds to check actual battery voltage.

Features :

  • 1) Short Circuit / Atomiser Protection.
  • 2) Reverse Battery Protection. 
  • 3) Battery Monitoring / Over-Discharge Protection. 
  • 4) Amperage Limiting to 4.0amps. 
  • 5) Vent hole on the bottom of the device for added safety. 
  • 6) Having a power display function , the out put power can be dectected and displayed on the led screen 3.0 – 15.0 w. 
  • 7) Check the resistance of atomizer

Related products