SLB eGo-V v4 MEGA battery 1300mah PassThrough variable voltage/wattage and ohm meter
Specifications Variable voltage battery from GreenVaper ( Sailebao ) :
This is the newest battery released on market from Greenvape . The main extra feature , is the ohm meter , which was missing on the previous models ( slb ego-v3 , slb ego-v2 and ego-v batteries ) .
The package contains the following :
- 1 X SLB eGo-V v4 MEGA battery 1300mah PassThrough variable voltage/wattage and ohm meter
- 1 X USB Charging cable
- 1 X Presentation box
Available colors :
- Stainless steel
- black matte
Main Features :
- Capacity : 1300 mAh ( 1200 puffs/charge )
- Variable voltage between 3V-6V with 0.1 v
- Variable wattage from 3Watts to 15Watts in 0.5W increments
- Easy OHM meter ON/OFF switching
- Ohm checker … screw on an atty and it reads the resistance automatically
- Short circuit or low resistance safety – unit will cut off power and display "LOR" on the LCD screen.
- Battery Meter: Display shows battery remaining in bars
- On/off switch
- OLED LCD screen
- 14 seconds vaping cut-off
- 510/eGo connection
- Lifetime : 300 cicles of charging
- LCD Sleep mode – LCD will not display if either the "+" or "-" buttons are not pressed for 20 seconds – conserving battery life.
-
The battery can be used while charging cable is connected (Pass-Through Functionality), charging stops temporarily during use, and resumes when not in use.
Please note: charging cable for this device is not compatible with other EGO batteries.
- eGo atomizers
- eGo-T atomizers
- 510 atomizers
- CE4,CE5,DC-TANK clearomizers
Technical specifications :
- Material : Stainless steel and copper
- Dimension : 141mm length and 17mm diameter
- Capacity : 1300mah
- Working voltage : 3.0v-6.0v
- Working wattage : 3.0W-15.0W
- Maximum current output : 2.5 Amperage
- Input : DC 5V 500mA
How to use it :
On / Off mode
Clicking the power button 5 times steadily in 3 seconds will enable the battery . Meanwhile the power button will blink 5 times during this operation .
Atomizer and cartomizer compatibilty
The eGo-V V4 battery has a standard eGo/510 connection for maximum compatibility .
Ohm meter
Ohm/Resistance Meter:Press and hold the "-" button about 2+ seconds and it will display the atomizer resistance.
Variable voltage ( vv ) and variable wattage ( vw ) mode
Press and hold the "+" button about 2+ seconds to toggle back and forth between voltage and wattage variable modes.
VV mode
Voltage can be adjusted from 3.0V-6.0V in 0.1V increments by simply pressing de "+" and "-" buttons . Once you reach the higher or lower ends of the voltage range it simply cycles around either way ( for example : pushing down at 3.0 takes you to 6.0 , pushing up to 6.0 takes you to 3.0 )
VW mode
Wattage can be adjusted from 3.0W-15.0W in 0.5W increments by simply pressing "+" and "-" buttons . Once you reach the higher or lower ends of the wattage range it simply cycles around either way ( for example : pushing down at 3.0 takes you to 15.0 , pushing up to 15.0 takes you to 3.0 )
Switch the mode
Holding "+" button simultaneously for 5 seconds , the ego-v v4 will switch VV to VW or VW to VV . There are "V" or "W" symbols on the right side of the digit display when you make the switch .
Lock the selected voltage or wattage
You can lock the setting by holding the "+" and "-" buttons simultaneously for 3 seconds after setting your voltage or wattage , so no accidental voltage/wattage changes are made .Repeating the process to activate the buttons symbol shows on the digit display when they are locked and disappear when unlocked .
14 seconds safety cutoff
If the button is held down for 14 seconds or longer the ego-v v4 will shut itself off and become locked , until the button is released and unlock by 5 clicks of the button . Protect you and the device from situations where it's in your bag or pocket and something were to accidentally activate the swithc without your knowing .
Sleeping mode
The digit display will enter sleeping mode and shut itself down if no operation on the "+" and "-" buttons for 20 seconds , even if you press the power button .
USB passthrough
You are able to use the battery when it's charging .
How to charge
The eGo-V V4 needs to be recharged when the battery indicator flashes repidly and prodouces no mre vapor . Use the included cable , connect the battery and the power outlet/USB port of your computer , USB home charger or USB car charger . The battery indicator will cycle while charging . When battery indicator stop circulating and stays at full , the charging is complete .
Normal charging time should be around 3-4 hours for eGo-V V4 battery . We suggest that you charge in time when the battery power below 10% ( that means 1 bar in the battery symbols )
Battery life
The eGo-V V4 can be charged and used 300 times approximately .
