Biansi IMIST 2 Electronic cigarettes personalized gun black kit | Vapo Logo

233.13 lei

In stock

Biansi IMIST 2 Electronic cigarettes personalized gun black kit | Vapo Logo

This is a unique IMIST personalized kit for our customers . Vapo Logo is printed on the box and on the atomizer's base . The batteries are original IMIST batteries .

Kit contains the following  :

  • 2 X Vapo personalized IMIST BIANSI Atomizers with conical tank
  • 2 X rechargeable IMIST BIANSI batteries 1100 mAh with 5 click protection , transparent button and red LED .
  • 1 X  USB charger 420 mAh(it takes ~3 hours to charge an empty battery)
  • 1 X adapter outlet-USB
  • 5 X conical tank cartridges , with no liquid.(empty)

Advantages of IMIST Biansi System

  • -The cases when atomizers had leakings like at eGo-T clasic system had beed eliminated.
  • -Flavour is copied integrally like the smell of the e-liquid and it maintains for a long period of time.
  • -Maintenance and cleaning is easier to made even if you are a beginner.

It is compatible with eGo-T and Joye eGo systems.

Specifications:

  • Length : 130 mm(battery with atomizer without cartridge) or 156 mm (battery with atomizer and cartridge)
  • Diameter : 14 mm
  • Cartridge capacity : 1.1 ml
  • Puffs per cartridge : 400 puffs
  • Battery capacity: 1100mAh
  • Battery outut: 3.7V
  • Full battery can keep for:1000 puffs
  • Charging times: 2-3 hours
  • Life of battery: More than 300 times

Available colors:

  • -Black(Gun black)

Usefull information

  • -You can usa a battery up to 8 hours/charge.
  • -Batteries are sealed to avoid any leakage.
  • -Batteries had a "5 click protection " system of ON/OFF .5 presses in quick succession in 2 seconds interval.

 

How to clean the atomizer ?
 
Dissasamble the atomizer in two parts and place the bottom part into alcohol and leave it for half hour, if needed, use a soft toothbrush to clean the heating wire. Let it dry for at least 2 hours.
You can change the wick Using a tweezer, remove the original fiberglass wick and replace with a new one.
Always be sure that the metal part of the wick fiberglass never make contact with the heating wire, otherwise could provoque a shortcircuit. Then the atomizer and battery’s circuit can be destroyed.